Wind Anemometer Cups for WH1081, WS1081, WS1083, WS1093, WS2083, WS3083

Showing reviews 1-10 of 11 | Next

1. Works well

   Posted by Jono on 3rd Feb 2021

   Old one wouldn’t run in one direction. This replacement was easy to fit and synced easily.

   ---

2. Same as original one

   Posted by Len Reeves on 13th Oct 2020

   I have had to replace the original one as two of the cups had broken off, never had any break off the other weather station I had.
   
   Easy to fit and good service.

   ---

3. Good product and fast dispatch

   Posted by Chris Eve on 30th Jun 2020

   I've had a weather station up on our roof for about 16 years now and have replaced three of these. They are generally rugged with a strong main bearing and we have had winds up to 150km/h in our exposed position next to the beach on the east coast near Whangarei. The problem with these is the magnet embedded in the cup hub. This is not well protected and eventually rusts and expands, firstly slowing the cups as it rubs on the housing below, then stalls it altogether. Some sort of weatherproof coating on the magnet should slow this down. Our atmosphere is damp and salty so the unit would probably survive better away from the coast.

   ---

4. Just like the original!

   Posted by Ross on 8th Feb 2020

   Excellent.. Just like the original.
   
   Easy to install and is up and running within minutes.

   ---

5. Replacement Wind Speed

   Posted by Stephen on 23rd Nov 2018

   Excellent service. Arrived the next day at my rural address. Fixes the problem of the previous one after it seized. Easy to fit.

   ---

6. Kayak or not

   Posted by Dave Campbell on 20th Jun 2018

   Very easy to install and great tool for me in the mornings to decide whether to go out in my kayak and do some fishing

   ---

7. Worked a treat

   Posted by John Kemna on 4th Jan 2018

   Correct replacement for my weather station and fixed my problem. The old one had done many years of service and a big wind gust seized it.

   ---

8. Wind speed

   Posted by Unknown on 8th Nov 2017

   Good product

   ---

9. Anemometer cups

   Posted by Wattie on 26th Sep 2017

   The small bearing that the cups rotate on had partially seized after 10 years which gave inaccurate readings, a call to SS gave a replacement
   But others be aware ultra violet light makes the plastic very brittle and every thing fell apart when handled..
   Everything lined up so it made repalcement a breeze
   I am very pleased with the excellent service I received and am back recording wind speed
   Make it part of your maintenance and have a spare on hand.

   ---

10. Wind Speed Again

    Posted by Unknown on 11th Jan 2017

    The bearings in the old one finally failed, so we are now back in business with a new sensor

    ---

Showing reviews 1-10 of 11 | Next