Product Description
The gateway plugs into the console of a Davis Vantage Pro2 using the Davis 6150SER serial logger. It appears on the Modbus network as a Modbus TCP/IP or RTU slave. This allows your programmable controller to monitor and carry out actions based on wind speed, wind direction, temperature, etc.
Specification
- Power Supply: 8 to 28V DC
- Power Consumption: 100mW
- Operating Temperature: 0 to 70°C
- 2 x Open Collector Outputs: for alarms or control
- Protocol: Modbus TCP/IP network via Ethernet. Can be polled by up to three Modbus masters simultaneously. Also supports Modbus RTU over RS-485.
- Provides a webpage whereby TCP/IP settings can be easily configured. Also shows current settings, weather data, and communications statuses
- Supports the new LOOP 2 command. This provides an additional 16 packets of previously unavailable weather data.
- Can directly write the internal memory of the weather station, allowing configuration values to be changed (commonly latitude, longitude, elevation, timezone, etc)
- Allows interrogation over HTTP to return any Modbus register values in XML format. Make your own custom application using the weather data
- Can be screwed to a panel, or mounted to DIN rail.
